printer remote setup for Phils OrangeStorm Giga

[falkorichter]

I want to plan this:

• We want to look at the printer while printing, we can to potentially change settings like speed and extrusion.
• ideally multiple viewing angles, filament, overview, detaill view on the printer

What we know:

• octoprint is working great with other printers
• tailscale provides remote access anywhere in the world and privacy

Manual can be accessed at https://download.elegoo.com/06%20FDM%20Printer/03%20OrangeStorm%20Giga/1.User%20Manual/OrangeStorm%20Giga-User%20Manual-V1.5-20240604.pdf
from the manual:

• LAN(Network) Printing
• Interface: USB Drive, LAN (Network), WiFi
• Camera Port is mentioned in the Machine Component Diagram

LAN(Network) Printing:

The device supports WiFi and network cable connection. After the connection is successful, check the IP address on the screen, and enter the IP address throughthebrowser to access the machine. NOTE: Your Printer and Your Local Computer can only be connected to the LAN (Network) over the same network segment. You should ensure that the network wiring port on thePrinterisconnected, otherwise the access will fail. Using Google Chrome (on your local computer), you can enter the IP address listed on your printer’s display screen to access the printer directly (eg. http://192.168.211.164). Following entry of this address, press the “Enter” key to access the Printer’s network page.

LAN(Network) Printing:

Upon the successful access of the Printer’s Network Interface, you will be presented with the following interface. Temperature Display
Console Display Task List Printer Limit
Movement Control
Fan And Output Movement Control: Provides the ability to control the movement of the printer’s printhead along each axis, and can set compensation following the leveling process. Fan and Output: Provides the ability to control the printhead fan and LED lights (on/off). Printer Limit: Sets the maximum acceleration control of the printer, normally there’s no need to modify. Temperature Display: Displays the Printer’s temperature(s) and heating status. This also provides controls for the preheating of the printhead temperature as well as the heatedbedtemperature. Console Display: Shows G-code commands executed and allows for manual G-code to be sent to printer. Task List: You can drag the G-code file of the ELEGOO Cura slicer to the task list here for printing.

here is the printer"

• OrangeStorm Giga printer remote access and remote control
• OrangeStorm Giga

Specs from the website

Produkt Modell
OrangeStorm Giga

Drucken-Technologie
FDM (Fused Deposition Modeling)

Rhamen Material
CNC-gefrästes Aluminium-Strangpressprofil

Spannung
100-120 VAC/220-240 VAC, 50/60 Hz1530 W (single head; +100 W pro zusätzlicher Druckkopf)

Dateiübertragungsmethode
USB, LAN, WIFI

File-Format
STL, OBJ

UI-Sprachen
Englisch, Französisch, Deutsch, Russisch, Italiensch, Spanisch, Japanisch, Chinesisch

Bauvolumen
800 × 800 × 1000 mm

Größe der Druckplattform (PEI-Bereich)
820 × 820 mm
(4 unabhängig 410 × 410 mm PEI Platte)

Machine-Size
1,224 × 1,164 × 1,425 mm

Packungsgröße
Grundteil + XY-Achse Komponent: 1,350 × 1,215 × 420 mm
Zwei Z-Achse Komponent: 1,350 × 1,215 × 350 mm

MAXIMALE GRÖSSE FÜR MASCHINENAKTIVITÄT/MM
1,224 × 1,520 × 1,570

Maximale Düse-Temperature
300 °C

Maximale Hot-Bett-Temperature
100°C (Umgebungstemperatur: 25°C)

Filament-Kompatibilität
PLA / PETG / TPU

Nettogewicht
104 kg

Bruttogewicht
145 kg

Wiederherstellung nach Stromausfall
Ja

Filament-Detektion
Ja

Maximale Geschwindigkeit des Werkzeugkopfes
300 mm/s

Maximale Beschleunigung des Werkzeugkopfes
5,000 mm/s²